Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the responsiveness of gas cooktops, but requires an oven for baking? Find a dual-fuel range cooker that gives you the best of both worlds.
Many home chefs with experience prefer gas cooktops for their superior temperature control and the ability to use advanced cooking techniques such as charcoaling. These powerful stoves are expensive, especially if they require an additional gas connection and an electrician to install them.
What is a 13amp plug?
If you have a dual fuel range cooker (also known as a gas cooker and an electric oven) you'll require an electrical outlet of 13 amps. The plug will also need to be wired hard into the cooker circuit using a competent electrician.
This ensures that the current flowing through the plug is secure and not excessive, which could result in an electrical fire risk. The current is controlled by a fuse within the plug. The fuse will blow as soon as it is overloaded. This safeguards the appliance from an overload of electricity.
The fuse is classified at 13 amps, as shown on the top of the plug and this is the maximum amount of current that the plug can pass without causing damage to the appliance or overheating the socket. It is essential to ensure that when replacing fuses, you always use the same rated amps as the original. If you replace the fuse with one that has a different rating, then you run the risk of overheating the socket and possibly putting yourself and others in high risk.
A 13 amp fuse will be a ceramic one that is extremely durable and can withstand the high temperatures generated by the range cooker. Ceramic is also fire-resistant, which makes it a more suitable choice over other kinds of fuse.
There are a variety of ways to install an 13 amp plug. The plug can be connected to a live socket using a screw or plastic jaw cord clamp. The clamp must be tightened after the plug is securely pushed into position.
Before connecting the wires you may need to remove the cardboard wiring diagram that is positioned over the pins of some plugs. The wires need to be cut to the correct length, because if they are too long they can get crushed when plug covers are changed. The earth wire must be the longest in order to connect it before the neutral and line pins.
How do I connect an outlet with 13amps?
The vast majority of dual fuel range cookers sold in the UK are connected to an outlet with a 13 amp rating and this is vital since ovens draw a significant amount of current, and the standard plug sockets are rated at 10 amps.
In general, new appliances should include a plug at the point-of-sale. This is in order to be in compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. However, older appliances may not have a plug and this is where the issue arises.
When connecting the cooker to an existing plug socket, the first step is to check that the rating of the fuse in the fuse box matches the plug's rating. This is crucial since a fuse that is not properly sized can be dangerous.
It is also important to check that the fuse is installed in the cartridge and there isn't any movement within it. Next up is to prepare the flex that is to be used. Remove the sheathing to expose the three conductors insulated. Next nick the sheathing at the point of entry to the plug (beyond the cord grip) using a utility knife without penetrating the individual insulated conductors. This nick must be large enough to allow the sheathing and cable to separate as the sheathing is pulled back. Cut off the excess sheathing leaving about 40mm beyond the flex.
The flex should be positioned over the plug with the earth terminal on the top and the live and neutral terminals at the bottom. Using the coloured conductors to guide you, the sheathing is then removed from each pin, and the internal cable is fixed to the appropriate terminal by using the cord grip. If the plug is fitted with an screw-type clamp for cords loosen it and pull back the insulation to reveal the copper conductors. Connect each wire insulated to the appropriate terminal by using the plug's channel. Start with the earth conductor, then the neutral, and finally the live.
What is the maximum draw of a 13 amp plug?
The maximum current draw for a 13amp plug at 230volts is 3kw. This is a large amount of power, but the standard fuse in a UK plugtop won't fail until the cable reaches a hazardous temperature. It is crucial to be aware of the amount of electricity you use in your kitchen as an unfit plug or socket could cause an accident.
The fuse in plugtops is ceramic, approximately 25mm in length and rated 240V mains. They will have the BS kitemark or similar mark on the side, and they contain sand. Plastic or glass alternatives are available, but should never be used in conjunction with live plugs.
The majority of dual fuel range cookers in the UK need to be hard-wired and are not able to plug directly into a wall socket. They are typically connected through a separate cooker circuit which is only suitable for appliances that can handle up to 20 amps.
Check the ring circuit of your home by using the fuse box, or contact an electrician in your area. They should be able to tell you if the sockets within your home are connected to the same ring or are separate and if there is a separate circuit for your oven.
The size of your kitchen is one of the main factors when you are looking to buy a dual fuel range cooker. We have a great range of cookers that will fit any space, including small 50-60cm dual fuel models and vast 90cm + double oven options from leading brands like Rangemaster and StovesAreUs.
dual-fuel range style cookers have a broad selection of multi-function electric and gas cookers. These multifunction cookers let you cook a variety meals, like pasta, casseroles and curries.
Explore our complete range of Cookers in Currys on our website or visit us in store to take a look. We provide free home installation and delivery on certain range cookers, as well as flexible payment options. Our team is on hand to answer any questions you might have. You can contact us by email or telephone. Credit is subjected to status, and terms and conditions apply.
What is the maximum current draw of a cooker switch?
There is lots of confusion regarding what the maximum current draw of a cooker switch actually is. The reality is that the majority of cookers aren't made to connect to an ordinary socket, but rather are hard wired and fed into a dedicated oven ring circuit. It is because they often consume more than 20 amps when both the electric hob and gas oven are being used.
You will not find dual fuel range cookers that can be fitted in standard sockets, since this could pose an enormous fire risk and infringe electrical regulations. A licensed electrician should install new electrics in the kitchen, connecting them to the cooker. They should also ensure that the total load of the oven and hob does not exceed the circuit's capacity.
The advantages of a dual fuel cooker are the responsive cooking power of a gas stove with the precision of an electric oven. They are therefore a favorite among both home cooks and chefs. If you want to try different cooking techniques such as searing and grilling, a dual-fuel range cooker is the perfect choice.
When you are looking to purchase a new range cooktop, you must take into consideration a variety of factors that include size, performance and cost. In addition, you will be required to ensure that your home has an appropriate gas hook-up to the appliance. If you're unsure, it's best to have a Gas Safe engineer inspect your home prior to installing.
The Currys range of dual fuel range cookers offers options that can be adapted to a range of budgets, from affordable models from Indesit and Zanussi to our exclusive Essentials collection. If you are seeking something more sophisticated, we stock a variety of top JennAir models that feature several new features.
It is important to read the owner's guide before purchasing a dual-fuel range cooker. This will provide specific information about the gas and electrical requirements. You will need an electric connection to your home. A plumber could be required to set it up for you. Depending on your home, you will also need to make sure that you have a cooker ring circuit that is installed and signed off by a licensed electrician.